GoVideo DV1030 User Manual page 26

DC-B86B1N-PS 04.5.20 9:29 PM 페이지25
To Record From DVD To Videotape during DVD playback
1
2
3
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
One Touch Recording (OTR)
To record the current TV program at the touch of a button, follow the procedures below.
1
2
3
Press [DVD] to select DVD mode.
Insert the desired DVD disc.
You cannot record copy-protected DVD discs.
Insert a recordable tape into the VCR.
Press [PLAY] to start the DVD playback and press [REC] to start
the VCR recording.
To exit record, press [ ].
Recording stops automatically when recorded tape reaches the end.
Video recorded in PROGRESSIVE SCAN mode will playback abnormally. First
change PROGRESSIVE to INTERLACED mode in the SCAN MODE screen, then
record from DVD to videotape. (refer to pages 44, 47)
First, follow steps 1 to 4 under "To Record With VCR" on page 24.
Press [REC] repeatedly to set the desired recording time:
Once .......... continuous recording until you press [STOP]
Twice ......... record for 30 mins from current time
3 (times) ...... record for 1 hour
. .
. .
10 ............... record for 5 hours
11 ............... record for 6 hours
12 ............... record for 7 hours
13 ............... record for 8 hours
14 ............... record for 9 hours
15 ............... Return to normal (continuous) recording
To stop Recording, press [STOP].
• If the program is running overtime, pressing [REC] will extend the recording time 1/2
hour.
R
ECORDING
25