Checking The System - Jabra GN9010-BT User Manual

Checking the System

If your telephone has volume control, set the
5
volume in the middle position.
Press the headset/handset
6
selector to switch on the
headset. The headset mode
indicator on the base station
illuminates.
The headset
7
mode indicator
on the headset
begins flashing
within 10
seconds. If the
headset mode
indicator does
not flash, recheck
assembly.
The system is now working.
8
If the lights are still off, the headset/handset selector
9
is in handset position. Press the headset/handset
selector once.
Adjusting to your Telephone
Put on the headset.
10
Make sure the mute
11
function is off. If
you hear a beep
every 3 seconds, the
mute function is on.
Turn off the mute
function by pressing
the mute button
once.
Lift the handset
12
from your telephone
and listen for a dial
tone in your headset.
If there is no dial
13
tone, adjust the tele-
phone compatibility
setting until the dial
tone is clear. If dial
tone is clear for both
A and G, set to A.