Lenovo ThinkStation P620 Hardware Maintenance Manual page 48

1. Enter the RAIDXpert2 Configuration Utility menu. Then, use the arrow keys to select Array
Management and press Enter.
2. Use the arrow keys to select Delete Arrays and press Enter.
3. Select the array(s) to delete:
a. Use the arrow keys to select the desired array or multiple arrays, then press the Space Bar or Enter
to change the option to Enabled for deletion.
b. If you want to select all of the arrays, use the arrow keys to select Check all and press Enter.
c. Use the arrow keys to select Delete Array and press the Space Bar or Enter.
d. Review the warning message. If you want to proceed, press the Space Bar or Enter.
e. Use the arrow keys to select Yes to delete arrays.
View array details
This option displays the details of an array. Nothing can be changed using this menu option. It is for
informational purposes only.
1. Enter the RAIDXpert2 Configuration Utility menu. Then, use the arrow keys to select Array
Management and press Enter.
2. Use the arrow keys to select Select Manage Array Properties and press Enter.
3. Use the arrow keys to select Select Array and press Enter. Select the desired array and press Enter.
4. Use the arrow keys to select View Associated Physical Disks and press Enter.
5. Press the Space Bar to select one of the members of the Array.
6. Use the arrow keys to select View Physical Disk Properties and press Enter.
7. Information about the array is displayed below Select Array header:
• Array number
• RAID level
• State
• Size
• Cache Tag Size
• Cache settings
• Associated physical disks
8. To view another array, press ESC twice and perform steps 2 through 7 again.
9. Press ESC to exit the main menu.
44
P620 Hardware Maintenance Manual