Replacing One Type Of Exhaust Filter With Another; When To Change The Thread Lifters; How To Replace The Thread Lifters; Cleaning The Roller On The Floorhead - Miele HS15 Operating Instructions Manual

en
Replacing one type of exhaust filter
with another (dia. 33)
Do not use more than one exhaust fil-
ter at a time.
Your vacuum cleaner is fitted as stand-
ard with a type c AirClean Plus exhaust
filter.
You can however use one of the follow-
ing exhaust filters:
a AirClean
b Active AirClean 50 (black)
c AirClean Plus 50 (light blue)
d HEPA AirClean 50 (white)
When changing to the AirClean ex-
haust filter, please note
Every packet of original Miele dustbags
contains one AirClean exhaust filter.
Multipacks contain four AirClean filters.
If you wish to use this filter, it is essen-
tial that you use a filter grille (see "Op-
tional accessories").

When to change the thread lifters

The thread lifters on the suction inlet to
the floorhead can be replaced. Check
them from time to time and replace
them if the pile has worn down.

How to replace the thread lifters

(dia. 34 + 35)
 Use a suitable screwdriver to remove
the thread lifters from the slots.
 Fit new thread lifters.
76

Cleaning the roller on the floorhead

AllTeQ (dia. 36)
 Release the bearing (with bayonet fit-
ting) using a coin.
 Press the bearing out, and remove.
 Remove the roller.
 Remove any threads and hair, replace
the roller and refit the bearing, locking
it back into position.
Replacement parts are available from
your Miele dealer or from the Miele
Spare Parts Dept.

Cleaning and care


Always disconnect the vacuum
cleaner from the electrical supply be-
fore cleaning it. Switch off at the wall
socket and unplug it.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a propri-
etary cleaner suitable for plastic.

Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based condi-
tioning agents.
Dust compartment
The dust compartment can, if neces-
sary, be cleaned using a dry duster,
brush or, if available, a second vacuum
cleaner to vacuum the dust out.