Advertisement
STEP 7
Once you're sure your divider panel is
straight, you can now put the top on,
securing it to the rack.
STEP 8
Add two shelf grippers to the top and
bottom, as shown. This will secure
your divider panel to the shelf. Repeat
this step for the rest of your divider
panel.
STEP 9
Take your hanging pole and slide it
through the top middle section of the
divider panel just below the top shelf.
Slide your hanging hooks on to the
hanging pole and space them out
evenly. Now connect the hanging
hooks to the top shelf.
**When using multiple hanging poles, use
the pole connector to bring them together
and make one continuous hanging pole.
Take one nut of the pole connector and
hammer it into one end of the pole. Take
the other nut and hammer it into the end
of the adjoining pole. Insert the thread-
ed bolt into both nuts and twist to bring
together.**
5
Advertisement
