Advertisement
STEP 4
Once finished, you can stand up
your rack and make sure the shelf is
secure against the four posts by
tapping the shelf with a rubber
mallet.
STEP 5
Measure 64 inches from the top of the
bottom shelf to the top of the next split
sleeve. This will ensure that your top
shelf is level and at the proper height
for the divider panels. Once you finish,
you can place the top shelf on your
rack. Tap the shelf with a rubber mallet
to ensure it is secure.
STEP 6
You are now ready to install your
divider panel. Remove the top portion
of your divider panel.The space
between these will match with the
model purchased. *If you purchased
an 18-inch model they will be 18
inches apart, just as if you got a
24 inch model they'll be 24
4
Advertisement
