Page 1
SYNERGY Convertible Crib Owner’s Manual Le manuel du propriétaire Scan the QR code to register your product https://dreamonme.com/customercare/registration/ Read all instructions before assembling and using product. IMPORTANT - Keep Instructions for future use. Lisez toutes les instructions avant d'assembler et d'utiliser le produit.
Page 2
SAFE SLEEP TIPS Small parts may Adult Assembly present choking Required. hazard prior to assembly. DO NOT use the Please read the product if it is instructions damaged, broken, thoroughly. Identify all and/or components are parts & hardware. missing or broken. To protect your parts Do Not Use Power during assembly,...
THANK YOU... …. for choosing Dream On Me and congratulations on joining our family; a family that has been transforming lives for 30 years! We appreciate your feedback and wish you the very best in the coming years with your new addition. If you have any questions or concerns please don’t hesitate to reach out to us.
Page 4
WARNINGS • FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN. •...
Page 5
WARNINGS (cont.) WARNING • Do not use this crib if you cannot exactly follow the accompanying instructions. • Do not use this crib for a child who can climb out of it or who is taller than 90 cm. • Do not place in or near this crib any cord, strap or similar item that could become wrapped around a child’s neck.
Page 6
PARTS If there are any missing parts, please contact Dream On Me before using the product. Footboard Right Front Leg Left Front Leg Headboard Right Rear Leg Left Rear Leg www.dreamonme.com/help...
Page 7
PARTS (cont.) If there are any missing parts, please contact Dream On Me before using the product. Mattress Support Side Panel (×2) www.dreamonme.com/help...
Page 8
HARDWARE If there are any missing parts, please contact Dream On Me before using the product. S'il y a des pièces manquantes, veuillez contacter Dream On Me avant d'utiliser le produit. Bolt 2-1/5” (×8) Bolt 3” (×8) Barrel Nuts (×16) Allen Key Bolt 3/4”...
Page 9
CRIB ASSEMBLY - RIGHT LEGS ASSEMBLY 1a. Align the Right Front Leg (2) and Right Rear Leg (5) towards the Side Panel (8). 1b. Insert the Bolts (B) inside the holes provided at the top and the lower end. Similarly insert the Barrel Nuts (C) from bottom.
Page 10
CRIB ASSEMBLY - LEFT LEGS ASSEMBLY 2a. Align the Left Front Leg (3) and Left Rear Leg (6) towards the Side Panel (8). 2b. Insert the Bolts (B) inside the holes provided at the top and the lower end. Similarly, insert the Barrel Nuts (C) from bottom.
Page 11
CRIB ASSEMBLY - SIDE PANEL ASSEMBLY 3a. To assemble the side panels to the Crib, align them to the Headboard (4) as shown in figure. 3b. Insert the Bolts (B) inside the holes provided at the top and the lower end of the Side Panels (8).
Page 12
CRIB ASSEMBLY - MATTRESS SUPPORT ASSEMBLY 4a. Attach all the corners of the Mattress Support Panel (7) to the Headboard (4) and Side Panels (8) as shown in the diagram. 4b. Insert the Bolts (E) and tighten it using the Allen Key (D).
Page 13
CRIB ASSEMBLY - FOOTBOARD ASSEMBLY 5a. Align the Footboard (1) to the Side Panels as shown in the diagram. 5b. Insert the Bolts (A) inside the holes provided at the top and the lower end. Similarly, insert the Barrel Nuts (C) from bottom.
Page 14
WARNING For Toddler Bed Use • FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION. • DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD. •...
Page 15
CONVERSION MODES - DAYBED ASSEMBLY 1a. In order to convert the crib to a Daybed, you must first remove the Footboard of the crib. 1b. Insert the Barrel Nuts (C) at both sides of and below the stabilizer bar (SOLD SEPERATELY). Insert the Bolt (A) into the holes provided at the lower end of the Side...
Page 16
CONVERSION MODES - TODDLER BED ASSEMBLY 2a. In order to convert the crib to a Toddler Bed, you must first remove the Footboard of the crib. 2b. Then attach the Stabilizer Bar and Toddler Guard Rail. 2c. Insert the Barrel Nuts (C) at both sides of and below the stabilizer bar (SOLD SEPERATELY).
Page 17
CONVERSION MODES - FULL SIZE BED ASSEMBLY 3a. In order to convert the crib to a Full-Size bed, you must first remove the Footboard of the crib. 3b. Remove the Mattress Support Panel, followed by Left and Right Panels. 3c. Make sure to follow the complete instructions provided with Bed Rails.
Page 18
FURNITURE CARE INSTRUCTIONS ROOM CLIMATE CONTROL: • Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment. If the room has high humidity it will absorb it and expand and if the humidity is low it will lose moisture and shrink.
Page 19
FURNITURE CARE INSTRUCTIONS (cont.) IN GENERAL: • Protect furniture surface from hot or extremely cold items. • Use coasters under hot or cold beverages. • Do not use synthetic fabric under accessories or lamps. • Protect tops from pens, markers and crayons. •...
Page 20
1532 S. WASHINGTON AVENUE PISCATAWAY, NJ 08854 www.dreamonme.com Follow Us @dreamonmeinc to get your nursery featured on our social media. Enter our monthly giveaway! Chat with us! Scan the QR code to register. Scan the QR code to Live Chat.
Need help?
Do you have a question about the Convertible Crib and is the answer not in the manual?
Questions and answers