Table of Contents
Advertisement
(Connecting Up
The setup descrrbed
here is a basic setup
that allows you to play discs using Just the
cables supplied with the player. In this setup,
stereo audio
played through the speakers
IS
your TV.
Important
This player is equipped with copy
l
protection technology. Do not connect
this player to your TV via a VCR (or your
VCR via this player) using AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
reason; refer to the manufacturer for
more information,)
1
Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use'SVideo or
component video cables for the video
connection.
2
Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
E n
Advertisement
Table of Contents
