Table of Contents
Advertisement
6 Photo
When you use the device for photo taking for the first time,
please read the instructions in this section! In the camera
preview state, directly press the camera button to take a
photo. In the state of photo taking, the red indicator lights
on, and the device makes a sound of 'beep'. In the dark night
or in a dark environment, the device additional light needs to
be turned on for shooting (Additional light ： In the preview
interface, long press the recording button to turn on the
additional light, then long press to turn off it. The light icon
will be displayed in the upper left corner of the preview
interface after the additional light is turned on, as shown in
Figure 2 ). In the video recording state, press the camera
button to capture the picture at the time. The interface of
which is shown as Figure 1.
Figure 1
Figure 2
EN
35
Advertisement
Chapters
Table of Contents
