Table Of Contents; Disassembly Procedure For Each Major P.c.b - Panasonic SA-AK600GC Service Manual

1. This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the
respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement
are required.
Contents
- Disassembly Procedure for each major P.C.B.
1. Checking of the Main, Panel, Sub-Transformer, Deck P.C.B.
2. Checking of Power P.C.B.
- Main Component Replacement Procedures
1. Replacement of the Traverse Deck.
2. Replacement of the Power Amplifier IC.
- Disassembly and assembly of the Traverse Unit
- Disassembly and assembly of the Disc Tray
Warning:
This product uses a laser diode. Refer to caution statement "Precaution of Laser Diode.

8.1. Disassembly Procedure for each major P.C.B.

8.1.1. Checking of the Main, Panel, Deck , Transformer and Power P.C.B.
Step 1 Remove 3 screws each side and 5 screws at rear panel.
12