Garmin GPSMAP 740 Owner's Manual page 18

Charts and 3D Chart Views
Turning Off AIS Reception
AIS signal reception is turned on by default.
From the Home screen, select Configure > other Vessels > AIS > off.
All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel targeting
and tracking, collision alarms that result from AIS vessel targeting and tracking, and information about AIS
vessels.
Enabling AIS-SART Transmission Test Alerts
In order to avoid a large number of test alerts and symbols in crowded areas such as marinas, AIS-SART test
alerts ignored by default. To test an AIS SART device, you must enable the chartplotter to receive test alerts.
From the Home screen, select
Showing AIS Vessels on a Chart or on a 3D Chart View
AIS requires the use of an external AIS device and active transponder signals from other vessels.
You can configure how other vessels appear on a chart or on a 3D chart view. The display range configured
for one chart or one 3D chart view is applied only to that chart or to that 3D chart view. The details, projected
heading, and trails settings configured for one chart or one 3D chart view are applied to all charts and to all 3D
chart views.
NoTe: The Mariner's Eye 3D chart is available if you use a BlueChart g2 Vision SD card. The Fishing chart
is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card, or if your built-in map
supports Fishing charts.
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's eye 3D.
3. Select Menu > other Vessels > AIS Display Setup.
4. Complete an action:
• Select AIS Display Range to indicate the distance from your location within which AIS vessels appear.
Select a distance or select Show All.
• Select Details > Show to show details about AIS-activated vessels.
• Select Projected Heading, enter the projected heading time for AIS-activated vessels, and select Done.
• Select Trails to show the tracks of AIS vessels, and select the length of the track that appears using a
trail.
Activating a Target for an AIS Vessel
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's eye 3D.
3. Touch an AIS vessel.
4. Select AIS Vessel > Activate Target.
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported
about a targeted AIS vessel.
1. From the Home screen, select Charts.
2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's eye 3D.
14
➏
Target with Projected Course and Heading
Configure other Vessels
>
➐
➎
AIS SART Test.
>
GPSMAP 700 Series Owner's Manual