Advertisement
The gate keypad allows you to gain access by using the built in keypad using a 4 digit
code. Up to 50 codes can be stored within the system. You programme the keypad codes
via SMS message then give the code to those you trust to access the gates. They simply
need to punch in the 4 digit code to gain access in the future. The codes can be any
combination of 4 digits you choose. Below is an example of how to programme the code
in.
Example:
#4073#STORE#
#4073#DEL#
If the code is accepted you will hear 4 beeps. If you make an incorrect entry you will hear
a singular long beep and you will need to start again.
The keypad tone sound can switched on and off via a text command.
#BEEP=ON#
Turns the keypad tone sound ON
#BEEP=OFF#
Turns the keypad tone sound OFF
The default setting is ON
To reset keypad codes only please send the text
www.gsm-activate.co.uk
Program Keypad Entry
This adds a keypad code
This deletes a keypad code
Keypad Tone Settings
Keypad Reset
Quick Commands
#KEYPAD=RESET#
Page 6
- 01273462380 - sales@gsm-activate.co.uk
Advertisement
