KEYPAD OPERATION The keypad has two output relays, which can be controlled separately using the # key or * key following the 4 digit code Example : Enter 1234# to pulse Relay 1 Enter 1234* to pulse Relay 2 You will then hear 5 short beeps together with 5 flashes of the keypad buttons to indicate that a correct code has been entered.
Page 5
#12345#) 3. Turn ON the power The DX-60 keypad will now reset itself, you will hear a beep and the keypad lights will flash, wait a few seconds and then turn OFF Dipswitch 1 to continue To activate Dipswitch 2 1.