Advertisement
Please make sure you disconnect the power when you fit the simcard. Then place the
Connect 240 volts to the input connector as per figure 1. Once the power has been applied
the blue network LED will flash once every second. Once a signal has been found the
green LED will come on and stay on, indicating that the unit is now ready for use.
1. Firstly, please register and put credit on the simcard. Follow the instructions given by
your simcard provider.
2. Insert the simcard into a mobile phone and disable the voicemail using the codes
below.
Vodaphone call 1210
T-Mobile
Orange
E - Send the text message VM OFF to 150
To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal the unit is receiving. Simply text the command
#SIGNAL#
The unit will perform a test on the signal strength
You will receive a text telling you the signal strength score between 0-30. We strongly
recommend that you place the unit where you will receive a score of at least 10. You will
find that a signal score of less than 10 will make the unit unreliable.
www.gsm-activate.co.uk
INSTRUCTIONS
IMPORTANT - PLEASE READ
simcard with the clipped corner facing outwards.
As seen in image above.
call 222
call 4502
Signal Strength
- 01273462380 - sales@gsm-activate.co.uk
Tesco
call 2915
O2
call 1760
GiffGaff
call 1626
Page 3
Advertisement
