Garmin GNC 420(A) Pilot's Manual & Reference page 180

SECTION 9
AUX PAGES
2) Turn the small right knob to select an option
from the Auxiliary Configuration Window
(Figure 9-82).
Figure 9-82 AUX CONFIG Window
3) Selecting 'Config Fields' configures the data
field to display user selectable data information.
Selecting 'Traffic' configures the data field to
display thumbnail traffic information (Figure
9-83). Press the ENT Key to accept the
Auxiliary Configuration selection.
Figure 9-83 Data Field Configuration Page w/Traffic
Press the small right knob to remove the cursor
4)
and return to the Setup 2 Page.
NOTe: The 'Traffic' selection in the auxiliary
Configuration Field is only available if the GNC
420 is configured for interface with a traffic
information device (see Section 11).
9-32
Restoring Factory Settings
When making changes to any Setup 2 Page option,
a 'Restore Defaults?' menu selection restores the original
factory settings (for the selected option).
Restoring a Setup 2 option to the original
factory settings:
1)
2)
3)
GNC 420(A) Pilot's Guide and Reference
Select the desired menu option from the
Setup 2 Page, using the steps described at the
beginning of this section.
Press the MENU Key to display the selected
page menu (Figure 9-84).
Figure 9-84 COM Setup Page Menu
With 'Restore Defaults?' highlighted, press the
ENT Key.
190-00140-20 Rev. K