Loading Files On Your Streetpilot; Step 1: Load The Usb Drivers; Step 2: Connect Ac Power; Step 3: Insert An Sd Card (Optional) - Garmin StreetPilot 7200 Owner's Manual

Streetpilot 7200/7500 owner's manual
Hide thumbs Also See for StreetPilot 7200:
Table of Contents

Advertisement

L
F
Y
S
OADING
ILES ON
OUR
TREET
Your StreetPilot 7200/7500 can store files, such as MP3
music files and Custom POIs. Using the USB Mass
Storage mode, copy and paste files to the StreetPilot
internal memory or to an optional SD Card.

Step 1: Load the USB Drivers

Before connecting the USB cable to your computer,
place the enclosed USB Driver CD-ROM into your
computer's CD-ROM drive.
If the CD-ROM does not start automatically, click
and then Run.... Type the letter of your CD-ROM drive
followed by "setup" (example: "D:\setup"). Then press
Enter.
Follow the instructions on your computer's screen.
20
P
ILOT
L
F
OADING
ILES ON
Y
S
OUR
TREET

Step 2: Connect AC Power

Connect the enclosed AC Power cable to the Power
connector on the right side of the StreetPilot. Connect
the end to an available electrical outlet.

Step 3: Insert an SD Card (Optional)

The SD card slot is located on the left-hand side of the
StreetPilot. Press the card in until it clicks.
Start
P
ILOT
Inserting an SD Card
StreetPilot 7200/7500 Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Streetpilot 7500

Table of Contents