Advertisement
Quick Links
COMPONENT PARTS
1
Guide rails (left and right)
1 set
2
Back wall holder plate (left and right)
1 set
3
Side wall (left and right) with self-tapping screws
1 set
4
Front wall fastener with the self-tapping screws
2 pcs
5
Plug
2 pcs
MOUNTING DIMENSIONS for START
with SBDW11
Internal body dimension=LW
4 holes h12
Dimensions for back
Dimensions for mounting
wall fastening
of front wall fasteners on the
internal surface of front wall
DB8181
SBH60
SBDW11
SCHEME OF GUIDE RAILS ADDITION
NL – length of guide rails from the sidewall.
Minimal internal size of body in depth (NL+3 mm)
For sizes: 270 / 300 / 350 / 400
Front rim of body side wall
For sizes: 450 / 500 / 550
Instruction on assembly
of START based pullout
furniture drawer
SB18
Advertisement
Related Manuals for Boyard START SB18
Summary of Contents for Boyard START SB18
- Page 1 COMPONENT PARTS Guide rails (left and right) 1 set DB8181 Back wall holder plate (left and right) 1 set SBH60 Side wall (left and right) with self-tapping screws 1 set Front wall fastener with the self-tapping screws 2 pcs SBDW11 Plug 2 pcs Instruction on assembly...
- Page 2 DRAWER ASSEMBLY AND MOUNTING FRONT WALL ADJUSTMENT FRONT WALL DISASSEMBLY Attach the left and right holder plates (of back wall and pot rack) Horizontal adjustment of the front wall from Remove the plastic plugs to disassemble the front wall. Attach the sidewalls to the drawer bottom with the help to the drawer back wall with the help of self-tapping screws.