Factory Mode
--Color Temperature--
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
5. Press the
or
(Cool, Neutral, Warm1, or Warm2.)
6. After the correct Color Temperature is selected, press the
to select the Temperature type that needs to be modified.
7. After the correct Temperature type is selected, press the
to increase the data value, or press
value.
8. Complete the data value adjustments to the remaining
temperature items within the selected temperature type.
NOTE: Changes to the data value must be saved within the
Temperature type selected before making changes to one
of the other Temperature types.
KDL-32BX320/32BX321/32BX420/32BX421/40BX420/40BX421/46BX420/46BX421
SECTION 7 - SERVICE ADJUSTMENTS
>>
<[
Cool
]>
<[
443
]>
<[
443
]>
<[
443
]>
<[
512
]>
<[
512
]>
<[
512
]>
<[
Off
]>
<[
Off
]>
[</>]Set [Menu] Exit
buttons to select the Color Temp type.
to decrease the data
9. To save the changes, press the
then press
.
Factory Mode
--Color Temperature--
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
10. Do one of the following:
a. To make changes to one of the other Temperature
types, repeat steps 5 through 9.
b. To exit Factory mode, press
to select Data Backup,
>>
<[
Cool
]>
<[
443
]>
<[
443
]>
<[
443
]>
<[
512
]>
<[
512
]>
<[
512
]>
<[
Off
]>
<[
W/B
]>
[</>]Set [Menu] Exit
POWER
60