LG F52590WH/01 Service Manual page 9

HOW TO CONNECT THE INLET HOSE
¥ Verify that the rubber washer is inside of the
valve connector.
¥ Tighten the inlet hose securely to prevent leaks.
CONNECT THE DRAIN HOSE
• Make sure that the hose is not twisted.
※ The end of the drain hose should be placed less than 100 cm from the floor.
CONNECT POWER PLUG
• Connect the power plug to the wall outlet.
• Avoid submerging the end of the hose.
• Avoid connecting several electric devices, as
doing so may cause a fire.
9
Cold