- Refresh Cycle ...21 Child Lock ...22 Beep On/Off ...22 Tub Clean ...23 Door Lock & Detecting ...23 Thank you for buying a LG Fully Automatic Washing Machine. Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance.
roduct Features Protection against creases With the alternating rotation of the drum, creasing is minimized. uilt-in heater Internal heater automatically heats the water to the best temperature on selected cycles. More economical with Intelligent Wash system Intelligent Wash System detects the size of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.
arnings READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE For your safety, the information in this manual must be followed to minimize the risk WARNING! of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
pecifications Transit bolts Drawer (For detergent and fabric softener) Drain hose Door Adjustable feet ■ Name ■ Power supply ■ Size ■ Weight ■ Max.Watt ■ Wash capacity ■ Water consumption ■ Permissible water pressure : 100 ~ 1000 kPa (1.0 ~ 10.0 kgf / cm The appearance and specifications may vary without notice to improve the quality of the unit.
nstallation ■ Removing packing Washer Base Packing Warning Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children. ■ Removing transit bolts To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs.
nstallation ■ Installation place requirement Drain Hose Washer Laundry approx. Positioning • Install the washer on a flat hard floor. • Make sure that air circulation around the washer is not impeded by carpets, rugs, etc. • Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.
nstallation CAUTION CAUTION concerning the Power cord Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets.
nstallation ■ Connecting water supply hose • Water supply pressure must be between 100 kPa and 1000 kPa (1.0 ~ 10.0 kgf / cm • Do not strip or crossthread when connecting inlet hose to the valve. • If the water supply pressure is more than 1000 kPa, a decompression device should be installed.
nstallation Type-C : Connecting one touch type hose to tap without thread Ring plate Guide plate Latch plate Step3: Connect hose to washer After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.
nstallation Installation of drain hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly. • Securing the drain hose correctly will protect the floor from damage due to water leakage.
nstallation ■ Leveling Raise Lock If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off. 1. Leveling the washing machine properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
• If possible install the washer in one of the corners of the room, where the floor is more stable. • Fit the rubber cups to reduce vibration. • You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept. • Proper placement and levelling of the washer will ensure long, regular and reliable operation.
ow to use washer Operating washing machine 1. Sort Laundry. (Refer to 15 page) 2. Open the door and load laundry. 3. Press the Power button. 4. Select a Program. (Refer to 16~18 page) Select options at this time (Refer to 20~23 page) ■...
ow to use washer ■ Care before washing Wash temperature Normal machine wash Permanent press Delicate Hand wash Do not wash Sort laundry by... Wash Soiling temperature Colour Fabric type Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to wash without clothing.
ow to use washer Washing program table • Recommended courses according to the laundry type. Description Program Provides better performance by Cotton combining various drum motions. Provide optimized washing Cotton performance with less energy consumption. This cycle is suitable for casual Easy Care shirts that do not need ironing after washing.
ow to use washer • Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing. • Set program at “Cotton Eco 60°C + Intensive” option for test in accordance to with EN60456 and IEC60456.
ow to use washer ■ Control panel Program dial Power Start/Pause button button Power • Press the Power button to turn power on and off. • To cancel the Time Delay function, the power button should be pressed. Program dial •...
ow to use washer ■ Additional program Time Delay You can set a time delay so that the washing machine will start automatically and ﬁnish after a speciﬁed time interval. The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.
ow to use washer ■ Options Option • Medic Rinse : For best results or for cleaner rinsing. • Rinse+Spin : This can be helpful in preventing fresh stains from setting in fabrics. This is a separate cycle. • Time Save : This option can be used to reduce the time of a wash program.
ow to use washer ■ Child Lock Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle. 1:20 Time Left Child Lock is on. Rinse Temp. 60°C 1:20 Time Left...
ow to use washer ■ Tub Clean Tub Clean is a special cycle to clean the inside of the washing machine. A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly. Time Left Tub Clean Rinse Temp.
dding detergent ■ Adding detergent and fabric softener The dispenser drawer Adding fabric softener Do not pour fabric softener directly on the clothes. • Main wash only ➔ • Pre Wash + Main Wash ➔ Warning Keep all washing detergents away from children as there is danger of poisoning.
dding detergent Detergent dosage • Detergent should be used according to the instruction of the detergent manufacture. • If too much detergent is used, too many suds can occur and this will decrease the washing result or cause heavy load to the motor. •...
aintenance • Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards. • Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. •...
aintenance The drain pump filter • The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove any threads or objects.
aintenance Dispenser drawer • After a while, detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
aintenance The washing drum • If you live in a hard water area, limescale may build up continuously in places where it cannot be seen and thus not easily removed. Over time the build up of scale clogs appliances, and if it is not kept in check these may have to be replaced.
roubleshooting guide • This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider. Diagnosing Problem Symptom Rattling and...
roubleshooting guide Symptom Washer does not • Electrical power cord may not start be plugged in or connection may be loose. • House fuse blown, circuit breaker tripped,or a power outage has occurred. • Water supply tap is not turned Washer will not spin •...
roubleshooting guide Error Messages Symptom Possible Cause • Water supply is not adequate in area. • Water supply taps are not completely open. • Water inlet hose(s) are kinked. • The filter of the inlet hose(s) are clogged. • Drain hose is kinked or clogged. •...
erms of Warranty Disposal of your old appliance When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. What Is Not Covered: • Service trips to your home to teach you how to use the product. •...