Transmitting - Furuno CSH-5L Operator's Manual

1. OPERATIONAL OVERVIEW
1.3.3

Transmitting

TRANSMISSION in the SONAR menu is off in the default setting. If it is has
been set to ON, the procedure below is not necessary. When the transducer is
lowered, transmission starts and when it is raised transmission is stopped.
1. Press the [MENU] key to open the menu.
2. Use the [RANGE] control to choose [MENU MODE] at the top of the screen.
3. Use the [GAIN] control to choose SONAR.
SONAR MENU
**
[MENU MODE]
DISPLAY MODE
TX OUTPUT
PULSE LENGTH
TX CYCLE
TVG NEAR
TVG FAR
AGC
2ND AGC
NOISE LIMITER
COLOR CURVE
COLOR RESPONSE : 1
DELETE COLOR
ECHO AVERAGE
INT REJECT
HOR BEAMWIDTH : WIDE
VER BEAMWIDTH :
COLOR
ERASE MARKS
ALARM LEVEL
AUTO TRAIN
TRAIN SECTOR
AUTO TILT
TILT ANGLE
TRANSMISSION
AUDIO VOLUME
ASSIGN SETTING : F1 KEY
ASSIGN MENU
PRESS [MENU] KEY TO EXIT
4. Use the [RANGE] control to choose TRANSMISSION.
5. Use the [GAIN] control to choose ON. The sonar starts transmitting and the
sonar picture appears.
6. Press the [MENU] key to close the menu.
To turn off transmission, choose OFF at step 5. "TX OFF" appears at the top
right corner of the sonar display when the transmitter is turned off.
1-4
(RANGE CTRL: U/D, GAIN CTRL: L/R)
**
: SONAR SOUNDER
: COMBI-1 NORM
: 8
: 8
: 10
: 6
: 7
: 2
: 1
: 3
: 1 2
2
: 0
: 1
: 1
NARROW
WIDE NARROW
: 1 2
: TRACK SHIP
: 9
: ON OFF
± ° ± °
: 10 20
: ON OFF
± ° ± °
: 10 14
: ON OFF
: 10
F2 KEY
: EXECUTE
SONAR menu
MARKS SYSTEM
COMBI-2
3 4
3 4
3 4
EVENT FISH
± ° ± °
40 60
± ° ± °
20 26
F3 KEY F4 KEY