Connecting To The Power Supply - LG T2735NTWV Owner's Manual

Connecting to the power supply

• The washer should be plugged into a 220 VAC, 50
Hz, 2-prong (grounded) outlet. Plug in the washer.
Improper connection of the equipment grounding
conductor can result in risk of electric shock. Check
with a qualified electrician or service technician if
there is doubt that the outlet is properly grounded. Do
not modify the plug provided with the appliance. Never
damage or cut off the ground prong of the power cord.
If the cord does not fit the outlet, have a proper outlet
installed by a qualified electrician. Failure to follow
these warnings can result in serious injury, fire, electric
shock, or death.
WARNING
• The power outlet must be within 1.5 m of either
side of the washer.
• The appliance and outlet must be positioned so
that the plug is easily accessible.
• Plug the washer into an electrical outlet which has
a voltage rating that matches the rating plate. For
best performance, plug the washer into its own
individual outlet. This helps prevent overloading
house wiring circuits which could cause a fire
hazard from overheated wires. If necessary, use
a new, 2-prong adapter or 2-wire extension cord
with a 2-prong (grounding) plug rated at no less
than the branch circuit. Do not use an extension
cord longer than 1m. Failure to follow these
warnings can cause serious injury, fire, electric
shock, or death.
• The outlet must be grounded in accordance with
current wiring codes and regulations.
• Time-delay fuse or circuit breaker is
recommended.
• It is the personal responsibility and obligation of
the product owner to have a proper outlet installed
by a qualified electrician.
WARNING
• Do not use a worn or damaged power cord or
power plug. Replace or repair it immediately.
• Failure to do so may result in death, fire, electric
shock, or malfunction.
• Do not modify the power cord and take care not to
damage it when installing or moving the washing
machine. Failure to do so may result in death, fire,
electric shock, or malfunction.
• Make sure that the washing machine is grounded.
• Connect this washing machine to a grounded
outlet conforming to the rating prior to use.
• Failure to do so may result in fire, electric shock,
or malfunction.
• Do not damage or cut off the ground prong of
the power cord. Doing so may cause death, fire,
electric shock, or product malfunction.
19