Auto Plotter Arp-15; Video Plotter; Fluxgate Heading Sensor C-2000 - Furuno FR-8051 Operator's Manual

A.2 Auto Plotter ARP-15
The Auto Plotter ARP-15 is an optional circuit
board which is accommodated in the display unit
of the radar.
The Auto Plotter can acquire radar targets manu-
ally and tracks them. An internal microprocessor
calculates target data such as speeds and courses,
and this information is displayed in alphanumer-
ics and by vectors.
A.3 Video Plotter RP-15
The Video Plotter RP-15 is optional circuit board
which is accommodated in the display unit of the
radar.
With the RP-15 you can enter navigation lines or
reference lines with as many segments and ver-
texes as required (maximum 25 lines and 30 ver-
texes per line).
An optional memory card enables you to display
a digital chart on the radar screen, either along or
superimposed on the radar picture.
A.4 Fluxgate Heading Sensor
C-2000
The Fluxgate Heading Sensor C-2000 converts
magnetic bearing to a bearing signal and outputs
it to the radar in AD-100 format.
A – 2