Table of Contents
Advertisement
How to remove the motor (See Fig. 13-1)
1. Remove the belt.
2. Remove the screws (F1) x 2 pcs., to remove the motor.
CD MECHANISM SECTION
Perform steps 1, 2, 3, 12, 13, 14 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 13-2)
1. Remove the belt (A1) x 1 pc., from the motor side.
2. Bend the hooks (A2) x 5 pcs., to remove the loading motor.
How to remove the pickup (See Fig. 13-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x1pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
All manuals and user guides at all-guides.com
– 13 –
Motor
(F1) x2
Ø 2.6 x 5mm
TAPE2
Figure 13-1
PWB
Disc Tray
(A2)x2
Figure 13-2
Stop Washer
(B3) x1
(B1) x2
ø2.6 x6mm
Shaft
Gear
(B2) x1
(B4) x1
Figure 13-3
CD-BA160H/1700H
Loading Motor
(A2)x3
Loading
Motor
Belt
(A1)x1
Pickup
CD Mechanism
Advertisement
Table of Contents
