Table of Contents
Advertisement
CD-BA160H/1700H
(J2)x1
Tape
Mechanism
PWB
Display PWB
(J1)x15
ø3x10mm
(K1)x6
ø3x10mm
(L1)x1
ø3x10mm
Figure 10-1
(M2) x1
(M1) x2
Figure 10-2
CD Player
Unit
Lock Lever
Figure 10-3
Note 3:
1. Be careful not to break the claw of the CD mechanism.
2. When fining back the cam gear assembly, let it lock by front
movement.
All manuals and user guides at all-guides.com
Front Panel
Open
Cassette
Holder
(Lift/Right)
Headphones
PWB
Tape
Mechanism
Turntable
Disc Tray
CD Player Unit
Clamp
Lever
Cam
Gear Rib
– 10 –
(N1) x3
1
Figure 10-4
(P1)x1
ø3x8mm
(P3)x2
CD Servo
PWB
(P2)x3
(P3) x2
Figure 10-5
CD
Mechanism
(Q1) x1
Figure 10-6
Note 1:
How to open the changer manually. (Fig. 10-3)
1. In this state, turn fully the lock lever in the arrow direction
through the hole on the loading chassis bottom.
2. While holding the lock lever, rotate the cam gear anticlockwise
until the cam gear rib engages with the clamp lever.
3. After that, push forward the CD slide holder.
Note 2:
1. After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of the connector so as to protect the optical pickup
from electrostatic damage.
2
Disc Tray
(N1) x3
CD Player Unit
Disc Tray
(Q2) x3
(Q1) x1
Disc Tray
Advertisement
Table of Contents
