Miele WWR860 Operating Instructions Manual page 25

Settings for compartment 
The dispensing quantity for
UltraPhase 2 for  (hardness range
I) is preset.
Dosage for comp. 
 Confirm the preset value with the OK
sensor, or change the value.
UltraPhase 2

Hardness level I

Hardness level II
 Hardness level III
The following appears in the display:
 Insert container 
 Remove the foil from the detergent
cartridge.
38
37
36
ml
35
34
36 ml
45 ml
54 ml
Before using for the first time
11:02
 Push the UltraPhase 2 detergent
OK
cartridge into compartment 2 until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
 "TwinDos" is set up. Changes can be
made in "Settings" / "TwinDos".
 Confirm with the
 Close the TwinDos access panel.
The display changes to the calibration
programme.
OK sensor.
25