Hall Sensor
Stator Housing
Water Guide
⑤
Loosen the 6 xing screws on the stator.
SNAP RING.
(Lower upper position screws)
⑥
Check the direction of SNAP RING.
(The handle of snap ring is toward to rotor and
stator.)
⑦
Preventing fallen the stator, tighten with one
hand and then loosen the last screw.
For assembly take care lead wire's state, it
⑧
produce a noise and cut attach the rotor.
7) Replacement of Bearing housing
asm
④
Loosen 14 Fixing screws on the Bearing
Housing ASM and pull up it.
38