Problem
Check water intake and
empty the water container
F233
F 307 or
Remove the milk
valve and clean it
Frequently Asked Questions
Possible cause and solution
The plumbed-water supply is not working.
Check whether the intake hose is kinked or the
water supply valve is not turned on completely.
Remove and empty the water container.
Insert the empty water container into the coffee
machine.
The following message is displayed:
Water container is being filled.
up.
To turn off the plumbed-water connection, fill and
insert the water container. You can then select
:
Settings
Water connection
The cup-rim sensor is not inserted or is incorrectly
inserted.
If the main dispenser is moving upward and the cup-
rim sensor is bumped, e.g., with a cup, the cup-rim
sensor loses its reference position.
Confirm the message with OK.
Reinstall the cup-rim sensor.
Cup-rim detection remains inactive and the main
dispenser stays in the top position until the coffee
machine is next switched on. Cup-rim detection is
reinitialized during the next switch-on operation.
The milk valve is faulty.
Remove and clean the milk valve (see "Cleaning
and care – Removing and cleaning the milk valve").
Please wait.
The water container fills
|
.
Off
73