Sangean WR-2 Service Manual page 14

WR-2
4-1. ALIGNMENT FOR AM SENSITIVITY
a. Required Instruments
AM Signal Generator
SSVM
b. Alignment Procedure
Mode Adjustment
TC1
AM
L2
c. Instrument Connection
AM Signal Generator
Loop Antenna
All manuals and user guides at all-guides.com
(1) Turn on the radio.
(2) Connect a SSVM to the speaker TP7 and TP8 terminals.
(3) Connect an AM signal generator together with standard loop dummy
antenna and feed 30% modulated signal to the AM ferrite bar antenna L2.
(4) Tune the generator frequency to 1404 kHz.
(5) Tune the AM frequency to 1404 kHz and adjust TC1 to have a max.
reading on SSVM.
(6) Return the generator frequency to 603 kHz.
(7) Tune the AM frequency to 603 kHz and adjust L2 to have a max. reading
on SSVM.
(8) Repeat (4) to (7) as necessary to minimize tracking error.
60 cm
The radio is located
perpendicularly to
the Loop Antenna
14
Procedure
TC1
TP7
TP8
DVM