Switching Pocket Pc Off And On; Switching Pocket Pc Off And On During Normal Use - Fujitsu Siemens Computers Pocket LOOX 700 Series Easy Manual

Today screen
Following the introduction the Today screen appears. The Today screen always appears when you
switch on the Pocket PC again after you have not used it for four or more hours. The Today screen
shows all important current information at a glance. From this screen you have access to all
programs and to the system settings.
Please also use the help function that is available on your Pocket PC if you want to know
i
more about operating the programs contained in the operating system.

Switching Pocket PC off and on

You usually switch the Pocket PC into the Suspend mode with the Suspend/Resume button. After
certain applications or the installation of new programs, it may be necessary to restart the Pocket PC
with the soft reset. Only in seldom, isolated cases is it practical or necessary to reset the Pocket PC
to the delivered state.
These three options for switching the Pocket PC off and on are explained in the following sections:
●

Switching Pocket PC off and on during normal use

● Switching Pocket PC off and on with Soft Reset function
● Resetting Pocket PC to delivered state
Switching Pocket PC off and on during normal use
Switching off with Suspend/Resume button
► Briefly press the Suspend/Resume button to switch off the Pocket PC.
The Pocket PC is switched to suspend mode.
If you have specified a switch-off time with the system settings, your Pocket PC will
i
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with Suspend/Resume button
► Briefly press the Suspend/Resume button to switch on the Pocket PC.
The application you were working on before you switched off the Pocket PC with the
Suspend/Resume button appears on the screen. The Today screen appears if you switch on your
Pocket PC again with the Suspend/Resume button after more than four hours.
A26391-K151-Z120-1-7619, Edition 1
錯誤! 尚未定義樣式。
19