Special Wash Cycles And Options - Whirlpool ADP 422 Operating Instructions Manual

Special wash cycles
and Options
Notes:
EN
number of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories:
contact@whirlpool.com
Wash options
The OPTIONS may only be set, changed or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
corresponding led/ symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another
(previously selected) option, it will flash 3 times and switch
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Delayed start
The start of the program may be delayed for
a period of time between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
12 hours, 4 hours if selection is above 12 hours. If 24 hours
reached, and the button is pressed, the delayed start is
deactivated.
counting down;
3. Once this time has elapsed, the indicator light switches
off and the program begins automatically. If at the time of
the
program starts automatically.
The Start Delay function cannot be set once a wash cycle
has started.
24
(see Table of wash cycles)
button (repeatedly) to delay the start of
option is cancelled and the selected
Multizone Option
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
and the wash cycle starts only in the upper or lower rack.
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
Child safety lock
A long press of
Sani Rinse Option
This option allows higher temperatures to be used.
, the
Select the washing program, press the Sani Rinse button and
the indicator light will switch on. To deselect the option, press
the same button again.
Ideal to clean crockery and feeding bottles.
Warning: the crockery and plates could be extremely hot at
the end of the cycle.
The Sani Rinse option results in lengthening of the wash
cycle.
Tablet option (Tab)
A long press of Sani Rinse button, will activate the
function. This option optimises washing and drying
results. To deactivate the
The "Tablet" option results in a longer wash cycle.
Drain out
To stop and cancel the active cycle, the Drain Out
function can be used.
the dishwasher will be drained out.
button, will activate the
, long press again.