Table of Contents
Advertisement
SOS
Before you can use the SOS function, you must have an active satellite subscription. Always test your device
before you use it outdoors.
Ensure you have a clear view of the sky when using the SOS function, because this feature requires satellite
access to operate properly.
Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the
user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.
During an emergency, you can use your inReach Mini 2 device to contact the Garmin
Response Coordination Center (IERCC) to request help. Pressing the SOS button sends a message to the
Garmin IERCC, and they notify the appropriate emergency responders of your situation. You can communicate
with the Garmin IERCC during your emergency while you wait for help to arrive. You should only use the SOS
function in a real emergency situation.
Initiating an SOS Rescue
NOTE: You can initiate an SOS rescue with the device turned on or off if the device has battery power.
1 Lift the protective cap
2 Press and hold the SOS button.
3 Wait for the SOS countdown.
The device sends a default message to the emergency response service with details about your location.
4 Reply to the confirmation message from the emergency response service.
Your reply lets the emergency response service know that you are capable of interacting with them during
the rescue. If you do not reply, the emergency response service will still initiate a rescue.
For the first 10 minutes of your rescue, an updated location is sent to the emergency response service every
minute. To conserve battery power after the first 10 minutes, an updated location is sent every 10 minutes.
NOTE: While in SOS mode, the device cannot be turned off.
inReach Features
WARNING
NOTICE
from the SOS button
.
International Emergency
®
11
Advertisement
Table of Contents
