Seneca S112A Quick Start Manual

S112A
EN
AMPLIFIER FOR ON/OFF SENSORS - UNIVERSAL INPUT
INCORPORATED PILSES DIVIDER - RELAY OUTPUT
S112A is an amplifer for ON/OFF sensors with the following features :
- Inputs:
- Divider:
- Output:
- Warning:
- Temperature:
- Humidity:
- Box:
- Size:
- Weight:
- Power:
- Consumption:
Equipments compling the electromagnetic compatibility prescriptions
based on the 89/366/EEC directive.
Reference norms:
- EN50081-2 : Industry environment emission norm
- EN50082-2 : Industry environment immunity norm
POWER
230 Vac
18 16
optoisolated to receive signals from sensors : reed (contact), NPN 2
wires, NPN 3 wires 24Vdc and 12Vdc , PNP 2 wires, PNP 3 wires
24Vdc, Namur sensor 8Vdc, photoelectric sensor.
Max frequency 400Hz, pulse min 2ms.
you can divide pulses in input by a programmable factor from 1 to 256
by 8 DIP-switches.
one relay with SPDT switch 5A 250Vac (resistive load).
Relay's mechanical life 10.000.000 operations.
green LED RETE : equipment on;
red LED USCITA : pulse's output.
-20 / +60 °C.
40 % at 40 °C (not condensing).
3 modules DIN 46277, in gray autoextinguishing noryl , to be coupled
on 35mm bar.
52,5 x 90 x 71 mm.
200 g approx.
115 / 230 Vac +/- 10 %
1,5 VA.
115 Vac
18 17
50 / 60 Hz.
OUTPUT
MI003590-E
12 11 10
ENGLISH - 1/4