Sony KP-ER43M31 Service Manual page 183

Connecting optional components (continued)
Connecting a DVD player to
1 Using an audio cable, connect R and L under
projection TV to the LINE OUT, AUDIO R and L output connectors on your DVD
player.
2 Using a component video cable, connect Y, C
(component video input) on your projection TV to the COMPONENT VIDEO OUT
Y, C , and C output connectors on your DVD player.
B R
3 Press t on the remote or the projection TV until "DVD" appears on the screen.
Component video cable
(not supplied)
To component
video output
To audio
output
C C Y
R B
COMPONENT VIDEO OUT
S VIDEO OUT
10
Using Your New Projection TV
To
(component video input)
Audio cable
(not supplied)
R-AUDIO-L VIDEO OPTICAL COAXIAL
LINE OUT DIGITAL OUT
DVD
player
Notes
• Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
C /B-Y (blue) C , B-Y or P
B b
C /R-Y (red) C , R-Y or P
R r
• When connecting to
you must connect Y, C
connect L and R to receive analog audio signals.
• Your projection TV does not support the progressive scan output of a
DVD player.
(component video input)
(component video input) on your
/B-Y, and C
B R
Rear of
projection TV
-
To L (white)
-
R (red)
B
R
(component video input) on your projection TV,
, and C to receive the video signals, and at least
B R
/R-Y under
Y
C /
B
B-Y
C /
R
R-Y
L
R
: Signal flow