How To Use - Mistral MVC306 Instruction Manual

3. How to assemble vacuum motor head
directly to the motorized brush head
This combination without the extension tube
allows you get easier access to surfaces
where use with extension tube is impractical,
staircases, chairs etc.
Remove the extension tube from both
vacuum motor head and the motorized brush
head, by pressing the release buttons of the
connectors and pulling extension tube out.
You can now connect brush head directly
to the vacuum motor head until it clicks into
position to secure.
Assemble vacuum motor head with
2-in-1 upholstery nozzle
1. The 2-in-1 upholstery nozzle accessory can
be used with or without the extension tube
to get into more difficult to reach places and
connects/disconnects to extension tube or
vacuum motor head direct in the same way
as the motorized brush.
2. The 2 in 1 nozzle itself can be adapted as a
brush style or micro vacuum head to suit your
needs.
Simply press the release buttons with thumb and
fore finger to unlock and slide the brush section
forward over the micro vacuum head and lock
in position.
To reverse simple press release buttons and slide
it back.
Release button

How to use

After you are familiar with the assembly of this
appliance and the use of the various accessories
and their functions, you can now put this appliance
to use.
With the battery pack fully charged and the
desired accessory selected and attached,
press the ON/OFF Button on the vacuum motor
head to start the appliance. The power indicator
light illuminates.
Press the Speed Control Button to select either
Low or High speed. At Low speed the operating
time is approximately 45 Minutes, at High speed 20
minutes.
When power indicator light starts flashing, switch
the appliance OFF, it is time to recharge the
battery.
Warning: Never use this appliance to
vacuum up liquids or water, it may
damage this machine.
8
Press release button and
slide brush head forward
Pull as far forward until it
locks over the micro head
Press the release button to
unlock and slide back