Mistral MVC306 Instruction Manual page 6

Accessories
Motorized brush
There are two brush rollers
Roller for hard floor
Roller for carpet floor
How to replace the rollers:
1. There is a locking tab on the brush head, push
it to Unlock position, the cover will pop out.
Locking tab Cover
Push the locking tab
leftward to unlock
Remove the cover
2. Angle the geared end of the roller into brush
holder cavity and align with gear of the brush
holder, push the opposite end of the roller
downwards into the locker cavity, place the
cover back and push downwards until it clicks
in position to lock it.
The cover pops up
Remove the roller
Geared end of roller
Align the gear on the brush to
the gear on the roller head
Slide it into the slot on the roller
holder
Getting to Know Your
Stick Vacuum
Congratulations on the purchase of your new
Stick Vacuum.
Before using this product for the first time. It is
extremely important that you read and follow
the instructions in this use and care booklet,
even if you feel you are familiar with this type of
appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
handy for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
6
Gear on the brush head
Other end of roller
Place the cover back, push it
downward to lock