Before First Use; How To Assemble - Mistral MVC306 Instruction Manual

Before First Use

1. Carefully unpack appliance and remove all
packaging materials.
2. Please retain all packaging until you have
checked and count all the parts and the
content against the parts list.
3. Charge the battery for 5 hours until fully
charged.

How to Assemble

Assemble the battery pack
Align the slots of the battery pack to its holder on
the Vacuum motor head, slide it forward, push it
firmly until your hear it click to indicate it is locked
into position.
Holder for battery
pack
Slide-in the battery pack
To remove the battery pack, slide locking tab
downwards and slide/pull battery out to remove
it.
Locking Tab
Push battery locking tab
into the direction (as
shown in photo above)
to unlock and slide
battery out to remove
Slots of battery pack
Push the battery pack
to lock in position
Slide battery pack out to
remove
How to assemble each part together
There is a rib on one part, a slot on another part,
align the rib to the slot, insert them together firmly
until you hear click and is secured in position.
Rib on one part
How to separate each part
The female (Slotted) connectors have a lock
release button.
Press this button down whilst holding the part
and pull with other hand on the mating part to
separate.
Release button on one part
Assemble handheld vacuum with
extension tube and motorized brush
Can be used to clean carpets and hard floors.
Tips: Please always turn off hand vacuum before
attaching to parts.
1. How to assemble extension tube to the vacuum
motor head
Align the rib of the connector on the extension
tube with the slot of the connector on vacuum
motor head, push in until you hear it click in
position and it is secured.
2. How to assemble the motorized brush to the
extension tube
Insert connector on the extension tube to the
connector on the motorized brush, by aligning
rib with slot, push in until your hear click and
brush head is secured.
To remove brush head, press the release button
on the connector of the extension tube to
unlock, with other hand, pull brush head to
remove.
7
Slot on other part