ABB OMD800 Installation And Operating Instruction page 50

50
A U T O M AT I C C O N T R O L U N I T, O M D 8 0 0
Language Selection
In this page it is possible to choose the Language. The choices are English, French, Italian, Spanish,
Finnish, German, Russian and Chinese. Factory setting is English.
Device Configuration
LCD Backlight Timer
Modbus
Language Selection
Figure 7.44 Language Selection, English as default
Change Password
In this page it is possible to change password. The password consists of four numbers. The new pass-
word is set by using UP, DOWN and ENTER keys. 0001 is the default password.
Device Configuration
Modbus
Language Selection
Change Password
Figure 7.45 Change Password, 0001 is the default password
Retype New Password
The new password has to be confirmed by retyping it. After confirmation, the user is returned to the
Device Configuration menu and on the bottom of the display the message PASSWORD CHANGED is
shown. If password confirmation does not succeed, on the bottom of the display is shown the message
INVALID PASSWORD and the old password is still valid. If the password is forgotten/lost, please, con-
tact product support.
Retype New Password
0000
Back Forward
Figure 7.46 Confirmation of the new password
11/12
Language Selection
Cancel
12/12
Change Password
Back
Device Configuration
Modbus
Language Selection
Change Password
Edit
PASSWORD CHANGED
English
OK Edit
0001
Forward Edit
12/12 12/12
Device Configuration
Modbus
Language Selection
Change Password
INVALID PASSWORD