Air Conditioner Features; Operation Of Current Device; Electronic Control Operating Instructions - Frigidaire 220201d011 Use & Care Manual

Room air conditioner
Table of Contents

Advertisement

Operation of Current
Device
Key Features
(On some model)

Air Conditioner Features

ON/OFF
ADJUSTS
TEMP &
TIMES
SETS
MODES
REMOTE CONTROL
Fig. "A"
ON/OFF
ADJUSTS
TEMP &
TIMES
SETS
MODES
ACTIVATES
REMOTE
THERMOSTAT
REMOTE CONTROL
w/DISPLAY &
REMOTE SENSING
BUTTON
Fig. "B"
SZ000302(En)-YaoKong(1018)
5
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from
the product manufacturer.
Multi-Step Fan and Cooling Speeds:
90 distinct fan settings give the ultimate in airflow and noise control.
Clean Air:
An ionic air filtration system that substantially increases the air-cleaning efficiency over conventional air
filters.
The Clean Air button on the air conditioner Touch Pad ONLY activates this feature.

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
touch pad alone or with the remote.
LIGHT
FAN
SPEEDS
ADJUSTS
TEMPERATURE
OR TIME
ACTIVATES
TIMER
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
LIGHT
FAN
SPEEDS
CLEAN AIR FEATURE
ACTIVATES
(some models)
TIMER
SETS MODE
TOUCH PAD
5
10/25/2004, 2:33 PM
DISPLAYS
TEMPERATURE/TIME
FAN SPEED
SETS FAN SPEEDS
AUTO COOL FEATURE
SLEEP MODE
REMOTE TEMP.
SENSING INDICATOR
(SOME MODELS)
TURNS UNIT
ON OR OFF

Advertisement

Table of Contents
loading

Table of Contents