Nokia 3650 User Manual page 53

• Callback type
service provider for the correct setting; it will depend on the service
provider's configuration.
• Callback number
dial back server uses. Usually, this number is the data call phone
number of your phone.
• Use PPP compression
transfer, if supported by the remote PPP server. If you have problems
with establishing a connection, try setting this to No. Contact your
service provider for guidance.
Glossary: PPP (Point-to-Point Protocol) - a common networking
software protocol that enables any computer with a modem and
a phone line to connect directly to the Internet.
• Use login script
• Login script - Insert the login script.
• Modem initialization
phone using modem AT commands. If required, enter characters
specified by your GSM system service provider or Internet service
provider.
GPRS
Go to Settings→
The GPRS settings affect all access points using a packet data connection.
GPRS connection- If you select
supports packet data, the phone registers to the GPRS system and sending
text messages will be done via GPRS. Also, starting an active packet data
connection, for example, to send and receive e-mail, is quicker. If you
select When needed, the phone will use a packet data connection only if
you start an application or action that needs it. The GPRS connection is
closed after it is not used by any application.
Note: If there is no GPRS coverage and you have chosen
the phone will periodically try to establish a packet data
connection.
- The options are
- Key in your phone's data phone number which the
- When set to Yes, this option speeds up the data
- The options are
(Modem initialization string)- Controls your
Connection settings→ GPRS.
When available
[ 44 ]
Use server no. / Use other no.
Yes / No.
and you are in a system that
Ask your
When available,