1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. PSBOC352413
  6. Quick start manual

Pulsar PSBOC352413 Quick Start Manual

6v/1,3a/oc caged, switched mode, buffer power supply unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PSBOC352413
v.1.0
PSBOC 27,6V/1,3A/OC
Caged, switched mode, buffer power supply unit
EN
Edition: 1st (10th Mar 2012)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSBOC352413 and is the answer not in the manual?

Questions and answers

Related Manuals for Pulsar PSBOC352413

Summary of Contents for Pulsar PSBOC352413

  • Page 1 PSBOC352413 v.1.0 PSBOC 27,6V/1,3A/OC Caged, switched mode, buffer power supply unit Edition: 1st (10th Mar 2012)

  • Page 2: Table Of Contents

    PSBOC352413 Features: • • 27,6VDC/1,3A uninterrupted supply FAC technical output indicating AC power loss • • wide range of supply voltage 176÷264VAC FPS technical output indicating PSU failure • • high efficiency 74% FLB technical output indicating battery low •...

  • Page 3: Block Diagram

    PSBOC352413 1.2 Block diagram. (fig.1). Fig.1. Block diagram of the PSU. 1.3 Description of PSU components and connectors. Table 1. Elements of the PSU (see fig. 2). Element no. Description LED indicating presence of AC power LED indicating presence of DC power LED indicating correct battery voltage FAC- AC absence technical output –...

  • Page 4: Specifications

    PSBOC352413 Fig. 2. The view of the PSU. 1.4 Specifications: - electrical specifications (tab.2) - mechanical specifications (tab.3) - operation safety (tab.4) - operating specifications (tab.5) Electrical specifications (tab. 2). Mains supply 176 ÷ 264V AC Current consumption 0,45A@230VAC max.

  • Page 5: Installation

    PSBOC352413 Temperature characteristics. Chart 1. Acceptable output current from the PSU depending on ambient temperature. Mechanical specifications (tab. 3). Enclosure dimensions 129 x 98 x 40,5 +23 [mm] (LxWxH) [mm] (+/- 2) Net/gross weight 0,39kg / 0,42kg power supply, technical outputs: Φ0,63÷2,5 I/O PCB : Φ0,41÷1,63...
  • Page 6 PSBOC352413 The shock protection circuit shall be performed with a particular care, i.e. the yellow and green wire coat of the power cable shall stick to one side of the ‘PE’ terminal. Using the PSU without a properly made and fully operational shock protection circuit is UNACCEPTABLE! It can cause a device failure or an electric shock.

  • Page 7: Operating Status Indication

    PSBOC352413 3. Operating status indication. 3.1 LED indication The PSU is equipped with 3 LEDs on the PCB board: - red LED (Fig.2, element 1) normal status (AC power): permanently illuminated. AC power absence is indicated by the AC diode going out.

  • Page 8: Maintenance

    WEEE separately. GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, starting from the initial product date of purchase placed on the receipt.

Table of Contents