JVC AV-32F703/Y Service Manual page 27

Measuring
Item
instrument
WHITE Signal
BALANCE gener ator
(High Lig ht)
adjustment Remote
control unit
***
(R)
[WHITE SCREEN]
REMOTE CONTROL UNIT
H.LIN E ON H.LIN E OFF
1
R DR IVE
4
R DR IVE
7
PIP WHITE Signal
BALANCE gener ator
(High Lig ht)
adjustment Remote
control unit
Only for
AV-32F803
/Y
Test point Ad justment part
S14:R DRIVE
S15:B DRIVE
***
(B)
EXIT
2 3
B DR IVE
5 6
B DR IVE
8 9
PIP08:R DRIVE
PIP10:B DRIVE
1. Receive the blac k-and-white signal ( color off ).
2. Enter to the SERVICE MENU mode.
3. Select the HIGH LIGHT mode in the SERVICE MENU.
4. Set the initial setting value of S14:R DRIVE and S15:B DRIVE
with the ④ ④ ④ ④ , ⑥ ⑥ ⑥ ⑥ , ⑦ ⑦ ⑦ ⑦ and ⑨ ⑨ ⑨ ⑨ keys of the remote c ontrol unit.
5. Adjust the screen until it becomes white using the ④ ④ ④ ④ , ⑥ ⑥ ⑥ ⑥ , ⑦ ⑦ ⑦ ⑦
and ⑨ ⑨ ⑨ ⑨ keys of the remote c ontrol unit.
(NOTE)
The ③ ③ ③ ③ EXIT key is the cancel key for the W HIT E BALANCE.
Ad justment item
S14 R DRIVE
S15 B DRIVE
1. Receive the blac k-and-white signal ( color off ).
2. Enter to the SERVICE MENU mode.
3. Select the PIP08:R DRIVE, PIP10:B DRIVE, of the 5.PIP(PIP)
SERVICE MENU.
4. Set the corresponding
FUNCTION ( / ) key of the remote control unit.
5. Adjust the PIP08:R DRIVE, PIP10:B DRIVE until the s creen
becomes white.
Ad justment item
PIP08 R DRIVE
PIP10 B DRIVE
No.52004
AV-32F703
AV-32F713
AV-32F803
Description
Initial setting value
64
64
initial setting values with
Initial setting value
63
65
the
27