Philips VTR8010 User Manual page 61

10 Radio Mode
From the main menu select Radio Mode, press MENU button
to enter. See the below picture of Radio Mode:
frequency mode
In radio mode, there are "user mode" and "frequency mode"
to switch, if some radio channels have been already saved.
Short press PLAY button to switch between the two modes;
if no radio channels have been saved, there is only "frequency
mode" available. In the frequency mode, press "
"button to choose radio frequency, press MENU button to
display: Save Channel, Auto Search, Channel List and FM
Record. In the user mode, press "
choose saved channel, press MENU button to display: Delete
Channel, Auto Search, Channel List and FM Record. The
reference interface is shown as below:
After Auto Search is selected, the system automatically
searches radio channels. When a radio channel is found, the
channel will be saved automatically and the radio channel
number is saved in the channel list. In the frequency mode,
users can save channels in a manual way. In user mode, users
can choose Delete Channel to delete a current saved channel
user mode
or Delete all saved channels. The device can store 40 radio
channels at most. Saved radio channels can be seen from
the channel list. Press "+" or "-" to switch among saved
radio channels in sequence and press MENU button to start
listening to the radio channel. If users choose FM Record, the
"or"
system starts recording the radio. See the interface picture
below:
"or" "button to
EN 61