Advertisement
3.1.3 Removing the tuner
(See Figs.8 and 9.)
• Prior to performing the following procedures, remove the metal
cover.
(1) From the top side of the main body, disconnect the card
wire from the connector
Fig.8.)
(2) From the back side of the main body, remove the two
screws G attaching the tuner to the rear panel. (See Fig.9.)
3.1.4 Removing the video board
(See Figs.8 and 9.)
• Prior to performing the following procedures, remove the metal
cover.
(1) From the top side of the main body, disconnect the card
wire from the connector
Fig.8.)
(2) From the back side of the main body, remove the three
screws H attaching the video board to the rear panel. (See
Fig.9.)
1-10 (No.MB263)
All manuals and user guides at all-guides.com
CN21
on the main board. (See
CN410
on the main board. (See
Tuner
CN410
CN21
Main board
Card wires
Video board
Fig.8
G
Rear panel
Fig.9
H
Advertisement
