Skip Id Recording; Setting Skip Id To A Track (Track Skip) - Fostex CR300 Owner's Manual

SKIP ID RECORDING

By setting track skip IDs to the tracks which failed or which consist of a blank, they can be skipped
when the disc is played later.
CAUTION:
Skip IDs can be set or cleared for up to a total of 21 tracks.
If skip IDs are set or cleared repeatedly, the number of tracks to
which track skip IDs will decrease.
Skip IDs cannot be set or cleared with CD discs or finalized CD-
R, CD-RW discs.
2,3
SKIP ID CLEAR
• If skip IDs have already been set, the
SKIP indicator lights on the display.
• When the track search button (
) is pressed while "SKIP" and
"SET?" are displayed, tracks to which
the skip IDs are not set will be played in
order of track numbers.
• T h e s e l e c t e d t r a c k s p l a y b a c k
repeatedly.
• When the play ( ) button or SKIP ID
CLEAR button is pressed during the
setting operation, the setting mode is
canceled.
• When an attempt is made to set or clear
more skip IDs than possible, "FULL" is
displayed and no more recording is
possible.
• When the button is pressed to remove
the disc, the skip ID setting data is
recorded on the disc. At this time, and
blinks "OPEN" is displayed for a few
seconds, and the tray opens after the
skip ID setting data has been recorded.
5
1
A. Setting skip ID to a track (Track skip)
1
Play the track to be
skipped.
Select it with the numeric but-
tons of the remote control unit
or a track search button .
Lights.
or
2
Press the SKIP ID
SET button.
"SKIP" and "SET?" are
displayed alternately.
3
To set the skip ID,
press the SKIP ID
SET button again.
4
Skip IDs can be set to other tracks by
repeating steps 1 to 3 for each of them.
5
After having set the
required skip IDs,
p r e s s t h e O P E N /
CLOSE button.
• Skip playback is not possible with an ordinary CD player which
does not incorporate the skip function.
REC
TRACK NO.
FADER
WREITE
REPEAT
1 2 3
4 5 6
7 8 9
10 10 TIME
29
CR300 <PRB1291-A>