High Voltage Components Layout; Tester And Special Tools - Mitsubishi Electric OUTLANDER PHEV Dismantling Manual

4. HIGH VOLTAGE COMPONENTS LAYOUT

High voltage (maximum 336V) components and wiring cables are located as shown in the
figure below.
High-voltage components
The high-voltage components are described below. Also, wiring harness and connectors of
high-voltage circuit are (orange in color.)
•
Main battery
•
Front motor control unit [FPDU (Front Power Drive Unit)] (incorporating
GCU [Generator Control Unit])
•
Rear motor control unit [RMCU (Rear Motor Control Unit)]
•
Motor (electric motor unit) <front and rear>
•
Generator
•
On-board charger/DC-DC converter
•
Electric heater <Vehicles with electric heater>
•
Main battery cable
•
EV charger cable (regular charging)
•
EV charger cable <Vehicles compatible with fast charging>
•
Service plug (Located under the floor behind the center console)
•
Wiring harness and connector
•
Main drive lithium-ion battery (maximum 336V)
Tester and special tools (or equivalent)
•
High-voltage multimeter (minimum Category IV)
•
EV battery lifting cart (special tool: MB992659) or equivalent (maximum capacity 1100 lbs.)
•
EV battery sling (special tool: MB992345) or equivalent (maximum capacity 1200 lbs.)
Service plug
5