Battery - Mitsubishi Electric OUTLANDER PHEV Dismantling Manual

8. INSPECTION PROCEDURE FOR MAIN DRIVE LITHIUM-ION BATTERY
1. If any abnormality, damage or defect is found after inspection, replace the main drive

battery.

1) Check if there are diagnostic trouble codes stored.
2) Check if the battery tray and frame is cracked or damaged.
3) MEASURE THE DISTANCES ON THE SHEETMETAL TRAY (DRIVE BATTERY).
Perform the measurement using the tracking gauge, convex, or other tool. The indicated
numbers are provided for reference.
Vehicle inner side
Front of Vehicle
Vehicle inner side
No. Measurement Point
1
2
3
4
5
6
7
Measurement Measurement end point
reference point
E
E
E
E
E
E
E
10
D
Measured distance
Dimension (mm)
A 1208.8
B 979.8
C 720.2
D 678.0
F 243.0
G 655.6
H 964.9
Vehicle inner side