Panasonic NV-SJ400A Service Manual page 8

2.2. REMOVAL OF CASSETTE TAPE
There are 2 ways to remove a cassette tape.
1. Service Information Display Operation
A. Press the FF and EJECT keys simultaneosly for 3 seconds and
set the Service Mode 7.
B. Press STOP key in order to rotate the Loading Motor for
unloading operation. (Pay an attention of tape slack)
2. Manual Operation
A. Disconnect the AC Mains Lead and remove the Top Panel.
B. Rotate the Main Cam Gear clockwise until the Loading Posts
move to fully unloaded position as shown
remaining)
C. Rotate the Capstan Motor clockwise from the bottom side to
take up the tape.
D. Rotate the Main Cam Gear clockwise until the cassette tape is
ejected.
2.3. INTRODUCTION OF VIDEO HEAD CLEANING CASSETTE /
(POLISHING TYPE)
1. We are pleased to introduce Panasonic Video Head Cleaning
inFig.
Fig. S9
Fig. S10
8
S9. (Tape is