Advertisement
SMS "Supplyoil123456" to the tracker. "Supplyoil" as instruction, "123456" as the password.
7. Control Circuit
Send SMS
"stopelec+password"
"stopoil" as instructions, "123456" as the password.
To supply the circuit again, send SMS
SMS "Supplyelec123456" to the tracker. "supplyelec" as instruction, "123456" as password.
8. Switch between "tracker" and "monitor"
Send SMS "tracker+password" to the unit, it will reply "tracker ok!". For example send SMS "tracker123456".
In this mode, you can get position SMS by call tracker. Default :tracker
Send SMS "monitor+password" to the unit, and it will reply "monitor ok!" and switch to "monitor" mode. For
example send SMS: "monitor123456". In this mode, you can monitor tracker by call tracker card number.
9. "Monitor"
There are three modes for monitor.
1) All Monitor Mode: Send SMS
number can monitor this unit.
2) Restrict Monitor Mode: Send SMS
mode, authorized number can monitor this unit.
3) Close Monitor Mode: Send SMS
numbers can not monitor this unit.
10. Movement alert
Set up: The user can send SMS
such a movement, it will send SMS "move+Geo-info" to the number.
For example, send SMS "move123456" to the unit. "move" as instructions, "123456"as password.
Cancel: Send SMS "nomove+password" to deactivate the movement alert.
Default radius is 200 meters, if GPS tracker moves out this radius, then it will send SMS alert.
11. Overspeed alert
"speed+password+space+080"
Set up: Send SMS
Example, send SMS "speed123456 080". "speed" as instruction, "080" as limit speed, "123456"as password.
Cancel: Send SMS "nospeed+password" to deactivate the overspeed alert.
12. Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the
authorized numbers when it breaches the district.
Set up: The user can Send SMS
MaxLongitude" to unit to set the restricted district. In case of breach, it will send SMS "stockade! + geo-info" to
the authorized numbers.
For example send SMS "stockade123456 22.548123,114.081234;22.549123,114.082234" to the unit.
Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the second latitude &
longitude is the coordinate of the max. It will alarm one time in each setting.
Cancel: Send SMS "nostockade+password" to deactivate this function.
VT600X USER MANUAL
to control circuit. For example send SMS: "stopelec123456".
"supplyelec+password"
"allmonitor"
to the unit, the unit will return to this mode. In this mode, any
"restrictmonitor"
"closemonitor"
to the unit, the unit will return to this mode. In this mode, all
"move+password"
to the unit, then the unit will reply "move ok!" .In case of
to the unit (support the speed is 80km/h).
"stockade+password+space+MinLatitude,MinLongitude;MaxLatitude,
to the unit. For example, send
to the unit, the unit will return to this mode. In this
5
Advertisement
