Table of Contents
Advertisement
Functions
Function
6. Pairing (Grouping multiple belt packs to the same system)
Below pairing procedure should be done to establish communication group.
PLEASE NOTE: YOUR SYSTEM HAS ALREADY BEEN CONFIGURED. PAIRING IS NOT
NECESSARY AND NOT
Pairing is made between the Master Belt Pack and the remaining belt packs.
STEP 1
Each belt pack must be set to a different user number. Belt packs can not have
the same User ID number.
STEP 2
Once pairing has completed, paired devices go to stand-by display.
STEP 3
If you press 'M' button while pairing is being processed, the pairing is canceled
and the belt packs go to stand-by mode.
Note
Pairing is automatically canceled if pairing is not completed within 60 seconds.
RECOMMENDED.
Press and hold 'M' button to go to Menu and then select "6. Pairing".
-08-
Push PTT button to
Push PTT button to
select
Advertisement
Table of Contents
